The long cage derailleur takes up more chain. Since you are going to replace the big ring with a bash guard, you might as well get a medium cage since you won't need as long of a chain. Unless as MMcG points out, you get a Shimano compatible Gripshifer and keep your XT derailleur. Also, you...
Are the rotor bolts properly torqued down? Often brake squeal can be caused by under/over or unevenly tightened bolts. Use a torque wrench and tighten them in 3 steps, 25in-lbs/40 in-lbs/55in-lbs. Also, how did you break them in? Try cleaning the rotors again (sand with 220 grit paper then use...
Saw him after the podium at the SLO Jeep race talking to Lopes. Naturally the photographers saw a photo-op. It should be pretty funny whenever it makes print. Both shirts off, Lopes' six-pack vs. Palmer's pony keg (he was sticking the gut out for maximum effect).
Check out www.sportsoptical.com
They can grind your prescription into the full lens, much better than an insert.
They also can do it with many different frames, in fact I got lenses installed in frames I allready had. I am very happy with mine.
No, it won't work. 16 tooth is the smallest that will fit a "normal" freewheel hub. Some flip-flop BMX hubs used to have a smaller diameter on one side (the flop side?) that allowed for the use of 14 or 15 tooth freewheels. There is a company called AC that has recently produced a 15 tooth that...
When I saw him for my wrist, every time he compared the first xrays to the latest to check the progress, he'd he always made it a point to say, "That is a nasty break" while shaking his head.
Collarbone is doing fine..been doing a little road riding...need to do more actually. Glad to hear you...
Hey Weed, heal up quick...I need some sumo revenge.
Who's your Doc? I've been to both Dr. Devine and Dr. Sheckluer (spelling?) and both did fine work screwing my bones back together.
Is she riding the same bike as before, or a different one? If it's a different one, check to see how well it fits. The better the fit, the more comfortable (both physically, and psychologically) she'll feel. A slightly shorter stem, or A taller bar can make a big difference in more technical...
Anyone out there had any experience with stripping a powder coated frame and polishing it? Advice on stripping and polishing products would be greatly appreciated.
Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.