[ddc]

'04 turner DHR owners..pls help me with some measures of the MED and/or SMALL DHR's:

1. the hole of the top shock mount to the start of the seat mast (were it welds with the top tube)
2. from the same top shock mount to the top end of the seat mast (were it's welded with the seat tube just below the seat collar)
3. the top side of the seat mast (from top tube to seat tube, near the seat collar)

i'll also appreciate if espen can tell me how long is the hose (from shock body to reservoir) of his Avy.

i just received my avy but i'm still waiting for the frame (MED)and wanted to be sure that the hose lenght will fit over the seat mast just like espen's bike. if the hose is too short i'll have to ride it over the top tube near the seat mast.

thank you all

diego

 

[Espen]

My hose is 6" hex to hex. 90 degree at 7 oclock.


e

 

[Jm_]

Originally posted by Espen
My hose is 6" hex to hex. 90 degree at 7 oclock.


e

my hose is bigger.

 

[ddc]

tks. acadian /espen.

espen please help me with the measures of your small seat mast. the hose of my "avy" is the same lenght as yours, tonight i'll take the shock and use your measures and acadian's to see if it will fit over the seat mast just like your DHR.

tks. again

diego

 

[Espen]

I can do that later tonight, when I got back from work.
The mast on the small frame is the same used as top and downtube on the frame.

It's turned 90 degrees, so its 2" high.



e