Quantcast

Chain Guide on Mob Problems

Discussion in 'BMX & Dirt Jumping' started by RFX, Oct 15, 2009.

  1. RFX

    RFX Chimp

    Rep/Likes:
    0 / 0
    Joined:
    Sep 19, 2009
    Messages:
    2
    Ok, Getting stuff put on and ran into a problem with my choice of chain guides. Looks like I need to either space the chainring in or the guide out. Being a BB mount chain guide, spacing it out doesnt work. Looking at my spacing with the ring and frame I dont want to space it in either. So has anyone done this setup? Any advice would be great. I have Profile cranks and ring with a G2 mini guide.
     

    Attached Files:

    #1 -   Oct 15, 2009
    Last edited: Oct 15, 2009

    Please register to disable this ad.

  2. TheTruth

    TheTruth Turbo Monkey

    Rep/Likes:
    4 / 0
    Joined:
    Jun 15, 2009
    Messages:
    3,922
    Location:
    I'm waving. Can you see me now?
    your gonna need to get a mountain crank unfortunately. Either that or just stick with the ss set up.
     
  3. eaterofdog

    eaterofdog ass grabber

    Rep/Likes:
    12 / 21
    Joined:
    Sep 8, 2006
    Messages:
    6,914
    Location:
    Central Florida
    How about using one of the thin spacers between the bearing and chainwheel?
     
    #3 -   Oct 15, 2009
    Last edited: Oct 15, 2009
  4. RFX

    RFX Chimp

    Rep/Likes:
    0 / 0
    Joined:
    Sep 19, 2009
    Messages:
    2
    can you run it without the cone spacer off the BB? If I spaced it right next to the BB then spaced the crank off the ring it might work, but look a bit odd.
    Im thinking I might have to get a iscg BB adpt then get a iscg guide and space that off the adpt.