[urbanbiker45]

Hi All,

I have a 2011 sram X9 2x10 crankset. I would like to convert my drivetrain to 1x10. All I need to do is change the sram crankset to 1x10, but I need to have a 104 bcd with the bashguard I will be using. Is there any available spider on the market that will work? Like I said, I cannot do the proprietary sram 120 bcd.

I saw the sram triple spider and the sram 1x10 conversion kit on the sram website, but, from my research, they are not yet available to the public.

Please advise, it will be much appreciated.

Cheers!
Sam

 

[urbanbiker45]

Any suggestions?

 

[urbanbiker45]

Any takers? Would greatly appreciate some thoughtful replies.

 

[VMARTINEZ]

Home Brew components, MRP, Middle Burn all make a single ring for those cranks.
You just take off the lock ring pull off the two rings and install the single ring. Put the lock ring back into place.
There you go.
VM

 

[urbanbiker45]

Thanks for the reply. I have a 104 bcd chainring I need to run. I am looking for a type of spider that can convert the sram x9 2x10 crank into a 1x10. Thanks.

 

[urbanbiker45]

If someone knows about this, please chime in. If someone knows there is no current solution, please chime in as well. Thank you.

 

[Gadget Guy]

North Shore Billet make a spider for the SRAM X9 to convert it to a 1x10 with 104 BCD.

https://northshorebillet.com/products/1-x10-104-bcd-spider-for-sram-x0-x9-cranks?variant=1112881517