E13 components?

jonKranked · Dec 15, 2014

i've got the XC cranks, aside from the BB bearings, they rule. I updated to the fancy version of their BB and those seem to be holding up much better.

daisycutter · Dec 16, 2014

A ffriends of mine have the wheel sets. No issues over the past year.

Segunda · Dec 16, 2014

Still running the 2007 DH Crankset, best investment ever...

mattmatt86 · Dec 16, 2014

I have their TRS+ wheelset on my trail bike and it's been bombproof for over a year.

kickstand · Dec 16, 2014

I break the bashguards off the chainguides on my DH bike all the time. But I don't figure that's E-13's fault.

I also dent the shit out of my wheels, specifically my mavic 729's, but as kidwoo always says, they still hold air and they are straight so who cares?

Why the concern over denting? Any wheel will dent (except carbon which will crack) if you hit a rock with it hard enough....

IH8Rice · Dec 16, 2014

Electric_City said:
My Sunday came with cheap ass MTX rims and I thought they were good. Then I rode them. It was such a disappointment to see 3 huge dents in them after the first day on a $6k bike. I ran the same psi I always did on my old bike, but they were trashed after several rides.

wow, i have no complaints from any of my MTX33 wheels. yes, some have dents but some are also 5+ years old and have taken a severe beating. i happily bought more and some mtx31's just to try also

schwaaa31 · Dec 16, 2014

^^ I'm with this guy.

wiscodh · Dec 16, 2014

IH8Rice said:
wow, i have no complaints from any of my MTX33 wheels. yes, some have dents but some are also 5+ years old and have taken a severe beating. i happily bought more and some mtx31's just to try also

mtx33's were by far the worst rim I have ever used. Lasted 2 months before I cracked one in multiple spots. Had many dents and flat spots too. 32-34ps, tubes, dh minions.

CBJ · Dec 16, 2014

I had a freak problem with my free hub. Their customer service was amazing and they went beyond what I could have expected to help me out. Good customer service is something I have come to greatly value in this industry.

MmmBones · Dec 16, 2014

I've been riding their DH cranks for 4 years. Only issue was with the BB, but I found some Enduro bearings and installed those. They've been flawless since.

banrider · Dec 17, 2014

CBJ said:
I had a freak problem with my free hub. Their customer service was amazing and they went beyond what I could have expected to help me out. Good customer service is something I have come to greatly value in this industry.

what sort of problem did you have? I have 2 TRS Race wheelsets and while one of them is perfect, the other one has a play in the rear hub I can't get rid of....e13 sent me new bearings but the play is still there...and on this wheelset I just keep breaking spokes too since September when I broke the first one (bought them last June) I broke 5 spokes so far....

CBJ · Dec 17, 2014

The freehub broke. I send in the wheel and they replace the hub and new spokes. Why not send in the wheel and get them to look at it?

Search

E13 components?

Electric_City

Torture wrench

jonKranked

Detective Dookie

daisycutter

Turbo Monkey

Electric_City

Torture wrench

Segunda

Chimp

mattmatt86

Turbo Monkey

kickstand

Turbo Monkey

Electric_City

Torture wrench

IH8Rice

I'm Mr. Negative! I Fail!

schwaaa31

Turbo Monkey

wiscodh

Monkey

CBJ

year old fart

MmmBones

Monkey

banrider

Monkey

CBJ

year old fart