bos idylle- rebuild
- Thread starter kotajack
- Start date
QBP at one point was a BOS service center, not sure if that's still the case.
I had a 2010-ish Idylle Rare that I rode for several years. I replaced dust wipers with SKF wipers for a Fox 36 and they fit just fine. I had the fork apart every year to replace the oil and clean everything, pretty straight-forward to disassemble and rebuild. Just don't strip the tiny screw at the bottom of the damper side that holds the LSC/HSC adjustments together. If that's stripped you'll have a hard time getting the lowers off.
I had a 2010-ish Idylle Rare that I rode for several years. I replaced dust wipers with SKF wipers for a Fox 36 and they fit just fine. I had the fork apart every year to replace the oil and clean everything, pretty straight-forward to disassemble and rebuild. Just don't strip the tiny screw at the bottom of the damper side that holds the LSC/HSC adjustments together. If that's stripped you'll have a hard time getting the lowers off.
U might try these guys https://www.worldwidecyclery.com/collections/bos-suspension
Customerservice@bos.mtb I sent an email here I’ll let you know if they respond.
I actually emailed them the other day and I did get a response.
I will get them the specs on the fork and see where it goes
In the meantime I might try to pick up something else, a fox 40 or a boxer since I have no idea how long it will take for parts and could most likely justify having a spare
I will get them the specs on the fork and see where it goes
In the meantime I might try to pick up something else, a fox 40 or a boxer since I have no idea how long it will take for parts and could most likely justify having a spare