stay away from eastern bmx frames. so far iv seen 2 cracked frames at my shop (down tube, about 1/2" from the headtube, all the way around) were talking one more jump till shearing off the headtube. btw the kid is about 125 pounds and semi-smooth. snapped the second frame in about 1 week. i have...
ok guys. Couldnt find to much info on the new clifcat tankass or sidestep. Lets hear any info, pictures, anything. Anyone have it set up for street? like this.
most local bike shops should have a profile (19/22mm, whatever) cup press or some other type of bb press, which im sure they will let you use or do it for free if they are not busy. make sure you use a quality bike lube tho, and also the spacer in between the cups. Also, a good rubber mallet has...
Landon:
small tires do not cut it for street (for me), hence why the question was asked. Im sure the steel will hold for what im doing. Anyone know anything better? thanks.
if your having trouble moving the axle/bearings or if the axle does not spin smooth, or if you feel alot of drag, there could be a chance that the axle is bent. The hollow axles in the hazards tend to bend a little easier than the solid. If you cant figure it out bring it down to your LBS. ask...
you do not need to remove the alxe to swap a driver on the hazard. Just the nut on the drive side. To replace, apply pressure to the driver while turning counter clockwise inside the shell. Be careful, all 4 pawls must engage together. You can hear and feel if you did it wrong. Also do not use...
ok, got a question for the general lee (or other bmx cruiser) owners. Which fork will fit a 2.4 holy roller? I currently have one instaled on a stock dk 24" fork (with about 1/2" ground out of the fork on each side, sketch eh?) Im reluctant to buy any other bmx type 24" fork, for fear of lack of...
AC? please explain. i understand a short axle to crown length is best on a FG. 460mm being the perfect length according to tonic fab. How would a nemesis 60mm lowered z1 (430mm axle to crown) effect the riding geo. sorry for the confusion
thanks
hey Boxxer,
Awsome bike, super clean lines. i have the same wheelset waiting for my fall guy! What are your forks lowered to? I know you can go either 100mm, 80mm or 65mm through nemesis.
Also, how does the FG ride with 65mm forks as compared to 80mm? (such as gold label or jumpers.)...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.