Quantcast

Search results

  1. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    hmm.. putting spacers there would make the chainguide move further outboard. I need the opposite....And the spacing between the two bearing cups would also become too wide. This is outboard bearings. Yes the chainring is mounted the "wrong" way to give addede clearence. If I mount the...
  2. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    ahhh..you lost me just after "you"...:)
  3. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    bb is 73mm on the dot! (faced and all) And I appreciate you trying to help me out, but I think the solution to this particular problem is called "what part to modify?"
  4. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Just to quote myselv:rolleyes: So, no, the chainring is not the problem.
  5. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    let me say this once and for all: There is NOTHING wrong with the way I have mountes anything. The guys at e-13 asked this more than a few times, the guys at RF did also, and just about everybody in the forums I have posted in... In my initial post I have quite clearly described how I have...
  6. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    indeed, why not... It is a good solution, but I think I might instead just make a new backplate and just have it with a 1mm stepdown where the plastic parts attach.
  7. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    :mumble: update: The problem is not the chainguide, but the cranks. All thet can be done in order to get a wider chaineline is done, but I still miss 1mm form the claimed chainline of 50mm that RF states the atlas cranks have... I have written to RF, but they just have this to say: ...
  8. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Hi Dave I have mountet it all the right way. I am SURE of it, and that is what bothers me. The two small spacers are on the driveside, supposedly giving a 50mm chainline. As I have stated before, the teeth on the chainring is flush with the outside of the ring (also visible in picture 3)...
  9. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Hi Dave, I have set the crankset up with the two supplied shims on the driveside of the spindle. It is not possible to get the driveside further outboard. This gives me a chainline of 50mm. As I wrote, I measured it yesterday, and the RF manual states this also. The distance from the backside...
  10. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    As shown in the pictures, the chainguide can be mounted, but even with a chainline of 50mm (measured yesterday, and stated by RaceFace) there is only 0.5mm clearence on the inside of the chain/upper guide. Also notice that the teeth on the chainguide is flush with the outside surface giving...
  11. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Hi Dave I sent some pictures over to Derek earlier today. I am able to fit the guide, but it is not the best fit ever, and I can´t see any way to improve it... I also measured my chainline, and it is 50mm, so should be OK, but somehow isn´t. Regards, Emil
  12. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Hi Hekkihall I´ll try and post some pictures a little later.
  13. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Hi Dave sadly all thing are mountet the correct way: 73mm BB, iscg 05 mountingplate fittet the right way round and replacing spacer on BB. Both 1mm spacers on the spindle is on the driveside. The chainring is NOT the problem. The outside of the teeth are FLUSH with the outside of the...
  14. WonderBoy

    E-13 Light guide and Raceface Altas misfit!

    Hi There Having been noting but impressed with the level of performance from my SRS guide I have just bought a LG1 guide to go on my new Nomad. I have a set of RaceFace Atlas cranks and a 36 tooth DMR I checked both e-13´s online guidepicker and their 2006 fitchart before buying the...
  15. WonderBoy

    Hubs...King, Hope, others??

    correct, but then on the other hand: Why would they become loose in the first place? Why not just make some good bearings, that you can replace cheaply when/if they deside to blow up?
  16. WonderBoy

    Hubs...King, Hope, others??

    How often do you have to adjust the King Hubs? I really would not like to have to do this on a monthly basis!
  17. WonderBoy

    Hubs...King, Hope, others??

    I´ll be using the bike for xc as well with a single chainring..so the 6 speed thing is not really an option... Is it REALLY important to have the King toolset to service the hubs? That I see as a major drawbaco over the Hopes?
  18. WonderBoy

    Hubs...King, Hope, others??

    The new hope pro II hubs sadly only has 24 points of engagement. My old Bulb had 36. Apparently the Pro II are going to replace all their hubs to make production easier and the hubs cheaper. I wonder if the difference between 24 and 36 points is that noticable? I noticed quite a difference...
  19. WonderBoy

    Hubs...King, Hope, others??

    I think I´m leaning towards a new set of Hope the Aireal are nice, but almost twice the weight of a set of Hope! (ok, ok...but 350-400 grams)
  20. WonderBoy

    Hubs...King, Hope, others??

    yeah..I figured that much...how about taxes and all that stuff? (If you don´t mind, drop me a mail at wonderpost@hotmail.com about how you dit it and what the cost were...og dansk er fint ;-))
Top Bottom