Quantcast

Search results

  1. HowlerMonkey

    2007 Marz 66 LT Fork Question

    I have a brand new '07 Marz 66 LT fork from a Scott Nitrous - it is the 180mm travel model with just rebound adj on the bottom of the right leg and air pre-load in the top of both. I would like to upgrade it with an ATA cartridge or consider what is out there if it is possible to get it done...
  2. HowlerMonkey

    About finished the NukeProof Couch FS

    Been holding onto the NOS NukeProof Couch FS frame for a while now. I built her up over the winter. Being a 250+ lb rider I went with King hubs and the new Syncros FR rim. Seem solid so far. Also went with Syncros' new FR Stem - very stiff as well. I put on a Marz 66RV 180mm travel fork - new...
  3. HowlerMonkey

    Marzocchi 888 or Shiver spring length?

    I am looking for an Extra-firm Marzocchi spring that is 11 7/8" long - the Shiver I believe had a 190mm model and the 888 may have a spring that I am looking for. Can anyone confirm this? I'll even take them off your hands if they are not doing you any good. Thanks!
  4. HowlerMonkey

    Specialized FSR 97 to 99 /Enduro 00 to 01 Linkage Question

    Didn't get the PM for some reason - please try again or email me at NukeProof at shaw.ca Thanks! Dennis
  5. HowlerMonkey

    Specialized FSR 97 to 99 /Enduro 00 to 01 Linkage Question

    It is a little too wide at the rear, which is no problem at all to fix - but, it is about 10mm too wide in the front - again not a big problem, BUT that part of the link is solid straight across so I cannot use it to straddle the mounts that I have. I think the later FSR stock linkages, at...
  6. HowlerMonkey

    Specialized FSR 97 to 99 /Enduro 00 to 01 Linkage Question

    Well, if I could get the following measurements, I'll let you know immediately: - inside diameter of where the front (smaller end) of the linkage bolts on at the front to the frame - AND outside width of linkage at that same attachment point - same measurements for the rear where it bolts to...
  7. HowlerMonkey

    Specialized FSR 97 to 99 /Enduro 00 to 01 Linkage Question

    Thanks! Metal ruler works for me. If you wish you can email me at NukeProof at shaw.ca This is really appreciated! If it works out will you sell the link? Dennis
  8. HowlerMonkey

    Specialized FSR 97 to 99 /Enduro 00 to 01 Linkage Question

    If someone has one of these can you please tell me the Outside Diameter of the front attachment portion of the linkage - and also the Inside Diameter of the rear attachment ... if you have one you know what I am asking fo. Thanks! DJ
  9. HowlerMonkey

    Anyone know where to go to get newly applied decals coated?

    I have tried a couple of places, but have had no luck. The clear coat process that the powder coat company I use say that the clear coat would adhere to the new paint very, very well - but not at all to the decals. Anyone got any ideas? I know they'll get scratched eventually, but I am trying...
  10. HowlerMonkey

    Add springs to an '05 Marz Drop-Off?

    I am not close to an expert, but I believe the fork has high pressure in the left leg and low in the right (plus internal rebound adjust). I also understand that heavier oil can slow down the action as well. I am wondering if coil springs can be added to these forks? I know that someone...
  11. HowlerMonkey

    New Pedals

    Man, innovation doesn't come along for something as simpla as a flat pedal very often - where they are functional and look like that. With winter up here all that I can do is play with the blue ones, but geez, they are gonna be some grippy. Likely need new shoes every couple of weeks hehe. :thumb:
  12. HowlerMonkey

    New Pedals

    I havn't got the faintest idea. Try emailing Dark Cycles and asking - couldn't hurt; after all they are close to release.
  13. HowlerMonkey

    New Pedals

    No - I don't mind; just over 130 shipped. I had to have them. Kind of like a smoker with lots of money and there is only one pack of cigarettes to be had. There are always ppl who will say that I paid too much, but it comes down to who's $$ is being spent. Peace.
  14. HowlerMonkey

    New Pedals

    I purchased my pedals from ebay - the guy who sold them to me, Hunter from www.abandonracing.com told me in an email that the arachnids will be available in clear ano and gold ano early in the New Year. Not a shameless plug/spam - I have never met him before - just trying to let those who are...
  15. HowlerMonkey

    New Pedals

    15.7 ounces, or 445 grams of tasty custom cnc ... Apparently there are only two sets out there right now, but they should be available in the new year. I agree - they make unique stuff. Functional and quality too, from what I am told.
  16. HowlerMonkey

    New Pedals

    Picked up a new set of Dark Cycles Arachnid Pedals - can't wait to try them out. They should be plenty grippy. They came from a new products show and are not in production yet. It's too bad I can't ride the buggers until the snow is gone up here in central Alberta. My shins should like them too.
  17. HowlerMonkey

    2001 Psylo Rebound Leak Questions ---->

    It's the white '01 Psylo with the black crown: First, there is a very small amount of oil escaping when the rebound knob on the bottom of the right fork leg is turned (not enough to cause dripping) ... next, Should that same knob turn infinitely in either direction? It seems like it really...
  18. HowlerMonkey

    When you,re feelin down in the dumps ...

    Just ta keep ya honest bro ... :)
  19. HowlerMonkey

    When you,re feelin down in the dumps ...

    If this brand of humour confuses you, there is no amount of explaining I can do. No offence intended. Try www.somethingawful.com under photoshop Phriday on the left column - start off with something like Board Games #1 or #2 (about 25 selections down). Some of them are hilarious ... if you are...
  20. HowlerMonkey

    When you,re feelin down in the dumps ...

    It can always be worse. Any other examples out there?
Top Bottom