Quantcast

problem

  1. szacsi72

    Avid Juicy 3 pad problems

    Hey guys I have an AVID Juicy 3 at home, but my idiot friend pulled the lever- when it was not on the bike. So the pads touched themself. I need help to fix it! Thanks David
  2. Kalbi777

    Manitou-dorado Questions...

    Hi guys ! I'm new to this forum with seams great so hello to anyone. I bought a new dorado maybe 2-3 months back. when I put my front wheel in the fork and I followed the instructions on how to align the fork legs to prevent internal friction. My wheel is closer to one fork leg. I also realized...
  3. prestonDH

    LG1R crank install issues

    I just bought the 170mm lg1r cranks for my evil undead, i also purchase the 83mm TiNi e13 bb. The spindle is the 123mm and not the 113mm so I know that is not the issue. I installed as per the instructions. Greased the threads for the BB. Since it was 83mm I put one black plastic spacer...
  4. M

    Boxxer race 06 making metalic clicking noise

    hi, i have an 2006 rock shox boxxer race that is making a metallic clicking noise when compressed and again on the rebound. It occurs about 5cm into the compression and gets louder the harder the shock is compressed. Also the compression adjuster does not seem to work anymore seeing as the first...
  5. U

    DART 2 Problems

    I have a pair of new DART II front forks on my Gary Fisher, and i've noticed that after some beating on the downhills it starts to lose about half travel, and sags to about 50% when I'm sitting on it. When i ride out flat for a while, it goes back to normal. Is this a problem or defect? I...
  6. C

    Fork Clearence

    I'v searched a few forums and haven't found any info on this problem yet. I own a slightly older chameleon before Santa Cruz "upgraded" the geometry. I purchased an 09 Vanilla fork but the top caps won't clear the frame. I'm looking at several options and need a little advice. Do i buy an FSA...
  7. Salami

    Classifed problems with new ads

    Every time I come on RM I check the classified section. I click What's New, then Since Your Last Visit. The new ads always come up. When there are enough ads to warrant a second page or more if I click the page # (say #2) the link does NOT work. I can enter the page number into the box and hit...
  8. slimshady

    Rock Shox Tora '06 BIG problem

    Hi, everyone. A frien of mine has just broke his Tora. We tore it appart, and found that the extension end of the hydraulic stanchion got broken (the small plastic cylinder which closes the right stanchion at its lower end). Immediately, I went to SRAM's web site, got the spare part catalog...
  9. ultraNoob

    2008 SRAM X9 Shifter

    Here's my disassembly and reassembly of an X9 rear shifter. I'm not too technical with my terminology but I'll do my best to keep the names for the parts as intuitive as I can. Hope this helps some of you out there. The info should be similar if not identical to the 07/08 X0's.I did my best...
  10. primo661

    boxxer problem

    i had an 04 boxxer world cup and it was really great until i snapped the arch in a huge bail, so i got a set of 04 races from a mate who had them lying around and put all my world cup parts into it, compression damper, rebound damper, silver stantions and new springs with new oil and they great...
  11. F

    Attention Sram users!!

    Whats up? well heres my story i broke my top bolt on my sram x.0 shifter and i can't any shop in north jersey that sells sram replacement parts... The part that broke is the bolt for the Right Assy. on a Right X.0 trigger shifters. Does anyone have a broke shifter that i can maybe get the part...