yea the old unit was close to 20 years old.
-{||— F R I D A Y —||}-
- Thread starter Changleen
- Start date
like how you think mayonnaise is spicy?I like to think of that as seasoning.
Triple like! What are the temps up there?
that was at 5500'- beech mtn. you can see grandfather mtn in the distance. 72*. not at the lift served part but shuttled the trails off the back side.
Got to visit a plant from a completely different division at work today. Always cool to go to other places and see how different it is and yet somehow still the same. They manufacturer injection molded parts, which was cool to see. They mentioned a part that is made out of multiple pieces of injection molded carbon fiber, which are then welded together. I wanted to see how that was done, but didn't get the chance.
This looks heavy..
And on the local work front, on Sunday we're ripping out the entire network at a building and upgrading it. New toys...yes yes yes everything will be properly labeled. Got my label maker ready to wage war.
4:30 now and AC still hasn't come on, despite being >90* most of the day. 3* from turn on temp, so it might go on, but not likely.
This is strictly a sweatin' and drinkin' trip.
couldn't you do that at home?
Did you have a seat or were you in the hold with the chickens?
I hate it when it's this hot out at horse shows. I think I will sit here in the camper. That 96 is in the shade under the non sun facing side of the camper
Putting those drying racks to good use?
Ha, not this season. The guy who has them is still sitting on last year's crop of dried cots. I would start my own dryer except I can't babysit it for the next week.
Drive over here and I can send you off with a few hundred pounds.
I get to see some cool places at work, one place had a CNC with a 4m rotating bed thingy at ground level and a lathe with something like 6m between centers.
Got to visit a plant from a completely different division at work today. Always cool to go to other places and see how different it is and yet somehow still the same. They manufacturer injection molded parts, which was cool to see. They mentioned a part that is made out of multiple pieces of injection molded carbon fiber, which are then welded together. I wanted to see how that was done, but didn't get the chance.
This looks heavy..
And on the local work front, on Sunday we're ripping out the entire network at a building and upgrading it. New toys...yes yes yes everything will be properly labeled. Got my label maker ready to wage war.
A friend walked me through his workplace, it was awesome, they rebuild big earthmoving equipment engines.
Tried to ride, had switched to my backup wheel since I had popped a nipple 5 pedal strokes into the climb trail last time. But the years-old tape would not seal and I found out that yes, a shock pump WILL fill a tire...but it's not optimal. Went back home to put a tube in it and of course my old tube with 5 patches no longer holds air, so back to the bike shop to get another tube. Not great.
Buy her a 850 fill down jacket. Make her put it on when she says that.