I am going to go Elixir CR lever to old code caliper. I want clearance, more than a 160mm rotor. A 140mm rotor would dictate less braking just more clearance. One brake SS is how it'll be unless i decided to ride it slalom...
So i guess the initial question still stands, and if no one knows, I will just have to find our for myself.
OKAY i know that the caliper will fit the adapter, my question is will that assembly fit the IS51 mounts with room for the caliper to clear the space in between the two holes.
although you are correct as far as the adapters go.
once I get the DOC, I am going to do a build up I am going to try out some stuff on it (140mm rotor with codes dremel out the dropouts maybe), that I am not sure if it has or hasn't been built with before
My build kit will be here right after thanksgiving, frame should be back from powdercoat round the same time, still haven't figured out a color for it.
this is the most confusing thread I have ever read...
Jarrod...I know you can get a 140mm mount (the road bb7 uses it)...Just source out that adapter (not sure if it is the same as a 160) your code will bolt right to it.
Are you trying to say "I think the code caliper is going to have issues on a 4 inch rotor mount because that caliper is meant for a 7-8 inch rotor adapter." If so, then you should not worry. It should work.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.