[Muddy]

Full Specs ----> VitalMTB Bike Check

Any area of the bike able to have something extracted to improve performance had been done:

Works Components Headset, Ti-Springs Thrust Bearing, Ti-Springs Coil (425lbs), Enduro Needle Bearing Kits, Tech 3 Hope Brake Pads fitted in Tech 2 EvoM4 Calipers, Avalanche Totem w/ Midvalve. 2.75" stroke shock installed in place of 2.5" stroke.

XTR 11spd is near-new, hardly ridden. Rims have been permanently altered w/ two Presta Valve holes per rim; wheels have a modified Schwalbe ProCore using a dedicated tube.

Renthal Carbon 35 Fatbar trimmed to 790mm.

No plugs in tires. Have spare Shorty, spare DHF 2.5 EXO tires.

Shock hardware is off-the-shelf Shoulder Bolts paired w/ Enduro Bearings. Spare Lower Axles, Seat Stay captive-bolts and other shock/linkage hardware spares included.

Reasonable Offers considered - buyer pays shipping from SWFL.

 

[sundaydoug]

If it were a MD I might make you an offer just because I regret selling mine. Those bikes are one of a kind.

GLWS

 

[Muddy]

Frame/Seatpost/Collar/Crankset/Headset all donated to a local Bike Club w/ good intent on passing it forward.
Frank the Welder could've dimed this frame I'm sure up to a contemporary 27.5" spec, it's having limited options to carry-over work on that Solo Air Totem from Craig Seekins that changed direction for another Full Suspension build-up.