Quantcast

22 Norco range C1! thoughts

bullcrew

3 Dude Approved
'kin nightmare frame to work on. (if neglected)
Looks to be a whole lot going on downstairs with it .this one is flawless and a handful of miles.

I did read that. It's always hard to take reviews and such being as most aren't used to a rearward path bike . I've been on them for years now..so it's hard to get a handle on their thoughts...

They consider a growing wheelbase hard to handle in tight stuff based on their bikes they have....which are likely not high pivot or rearward .

I base them against the Jedi and all the iterations before that as a baseline...I'm used to muscling a little to ride em and know speed is key...
 

Da Peach

Outwitted by a rodent
Jul 2, 2002
13,793
5,260
North Van
Looks to be a whole lot going on downstairs with it .this one is flawless and a handful of miles.

I did read that. It's always hard to take reviews and such being as most aren't used to a rearward path bike . I've been on them for years now..so it's hard to get a handle on their thoughts...

They consider a growing wheelbase hard to handle in tight stuff based on their bikes they have....which are likely not high pivot or rearward .

I base them against the Jedi and all the iterations before that as a baseline...I'm used to muscling a little to ride em and know speed is key...
Ryan Walters is a very fast rider. His review is here:

I think his daily driver is a Specialized Enduro...
 

Gary

my pronouns are hag/gis
Aug 27, 2002
8,594
6,495
UK
Looks to be a whole lot going on downstairs with it .this one is flawless and a handful of miles.
Just keep an eye on play and sort it out with replacement bearings ASAP and you should be fine. Although with the linkage it can be more difficult to detect play early if you're not tuned into that. I'd guess you will be though.
 

HardtailHack

used an iron once
Jan 20, 2009
7,915
7,330
I'm not really an electronic gears person, but on that thing I would be just so I didn't have to look at that routing.
Balfa did it better near 20yrs back.
 

Gary

my pronouns are hag/gis
Aug 27, 2002
8,594
6,495
UK
I'm not really an electronic gears person, but on that thing I would be just so I didn't have to look at that routing.
Balfa did it better near 20yrs back.
I'd almost forgotten about the horrendous form before function cable/hose routing. Most modern high pivot designs seem to suffer pretty badly from this and the norco's are bad enough to consider downgrading to an electric derailleur. Routing on most of them could easily be improved with a drill, a few zipties and bit of ingenuity.
 

HardtailHack

used an iron once
Jan 20, 2009
7,915
7,330
I think you got dudded, that Spesh would want to ride like a dream because it got properly fucking belted with the ugly stick at birth.
Isn't aesthetics No1 at Spesh?