who makes the beefiest 3 piece cranks for euro bb?
mainly riding street...
mainly riding street...
3 piece cranks
- Thread starter crashedupderby
- Start date
get the profile race cranks and they'll be plenty beefy...
a lot of the street guys run the profile race cranks with ti spindle to save weight and they arent having any problems...
too much beef is overkill
a lot of the street guys run the profile race cranks with ti spindle to save weight and they arent having any problems...
too much beef is overkill
Don't forget to check out RNC Cranks - the warranty is amazing on them too!! Get them from Phat Moose Cycles and they include the "Phat Moose Ruttin' Ring" and integrated bashguard/spider.
http://www.phatmoosecycles.com
http://www.rncmfg.com
Hope that helps,
Dave
http://www.phatmoosecycles.com
http://www.rncmfg.com
Hope that helps,
Dave
id go with profiles
if moneys tight, you'll never bend the FSA x-drvies.
"built like a brick sh!thouse" comes to mind.
take care of the bearings and yer set.
"built like a brick sh!thouse" comes to mind.
take care of the bearings and yer set.
what is your experience with gusset pygmies?
I like them, but i have been told to stay away from identiti, i guess they are under the same umbrella...
I like them, but i have been told to stay away from identiti, i guess they are under the same umbrella...
The On One retards are beefy and heavy as fawk. I run those cranks with the american bb, and it feels like a tank. If I had to do it all over again, I'd go with something lighter.
There aren't that many people who need anything beefier than Profile race cranks. They are even priced really well, so you CAN'T go wrong. Get some.
i hav gussets and i would addvise not to get um because they seem to want to undo and tighten up the whole time on their own, its dodgy.
I have a freind who has gussets and he is stoked on them.
I do have a pair of profiles on the way however...
thanks for the input
I do have a pair of profiles on the way however...
thanks for the input