[bullcrew]

(only posting it since it's below my cost as a dealer to make a set)

So spoke X in Temecula, CA is doing a sale on industry nine Hydra hubs (all colors if available) and spoke x sx30 alloy rims

Lifetime warranty on wheelset!!!


Hunter 760-505-5441 (spoke X)
$599


Spokes you can add colors as well as , decal color, spoke color, nipple colors for a little extra...warranty etc on Wheelsets ..been several pros on them as well as slopestyle...they were ran at Red Bull rampage (luke Whitlock, Dylan Crane, Olivia Silva)..

I've been hammering them on the DH bike, Enduro and the Emtb...

Just figured I'd pass this on as this is below my cost to make a set...

 

[daisycutter]

To be clear 599 for a complete wheelset? I was using the wheel builder and only the carbon options were listed when I got to the rims section. I guess I will give them a call and see whats up.

 

[bullcrew]

Yes $599 for a wheelset front and rear hand built.
Said pick color of hubs you want , xd, micro or if your old school hg...

Hydra hubs (12x148, 15x110, 12x157) any color if not sold out, spokes, nipples, sx30 alloy wheels, hand built (Greg is anal about his builds, hippie and loves what he does)..

Best is to call, Gregg. Josh or the owner hunter..

..Hunter swung by today and said to go ahead and post it ..your have to call in to spoke x . He's always moving inventory to keep circulation...

 

[jackalope]

That seems like a killer deal. Speaking of which I just picked a set of Reserve DH wheels (1/1 Industry 9 hubs) for $455. No ride time on them yet, but they seem burly and nicely built.

 

[bullcrew]

Yeah the 1:1 hubs are decent...I looked at reserve wheels , almost grabbed a set.thats a good price on those...they aren't cheap...

I'm running the prototype 300x carbon rims that hunters got in testing on one wheelset I use at bike park and downhill..all 3 bikes are rocking the sx30 alloy and hydra combo....

 

[bullcrew]

Ok Hunter is putting the sale up on the website, also said to call him and he can set up what design or colors you want...

Hunter 760-505-5441
Added this to first post

 

[CarolinaCrawler]

I just picked a set of Reserve DH wheels (1/1 Industry 9 hubs) for $455

I've been eyeing those for a while. I really would like a set for the DH bike. I wonder if they are clearancing these out to get rid of them?

 

[bullcrew]

I've been eyeing those for a while. I really would like a set for the DH bike. I wonder if they are clearancing these out to get rid of them?

Im thinking alloy reserve hoops, and that's a good price for sure...I'm not a fan of the 1:1 hubs but they are a good hub.

 

[bullcrew]

These are on hydras and lifetime
warranty on wheelset...so they are backed really well..st swiss profile and have held up to a shit ton of abuse on the bikes ..

 

[jackalope]

So because Jesus hates me apparently, there is some "new" front hub standard that I was not aware of. When I put my new front wheel in (20 x 110 just like my old front wheel) the rotor makes contact with the bulges in the lowers for the brake bolts. Upon comparing the 2 hubs, it's clear the new one puts the rotor a few more millimeters outboard compared to the old one. FML

The end caps are symmetrical, so in theory, asymmetrical end caps would solve the problem, but I very much think I9 offers no such solution. I could get the grinder out and fab up a spacer, but that seems like a less than ideal solution. The fork is a 2019-ish Boxxer, so I'm a little surprised it's now archaic and won't work with new front hub rotor spacing. Will probably just lace an old hub into the rim until I get around to getting a new bump stick. Yay bikes!

 

[canadmos]

So because Jesus hates me apparently, there is some "new" front hub standard that I was not aware of. When I put my new front wheel in (20 x 110 just like my old front wheel) the rotor makes contact with the bulges in the lowers for the brake bolts. Upon comparing the 2 hubs, it's clear the new one puts the rotor a few more millimeters outboard compared to the old one. FML

The end caps are symmetrical, so in theory, asymmetrical end caps would solve the problem, but I very much think I9 offers no such solution. I could get the grinder out and fab up a spacer, but that seems like a less than ideal solution. The fork is a 2019-ish Boxxer, so I'm a little surprised it's now archaic and won't work with new front hub rotor spacing. Will probably just lace an old hub into the rim until I get around to getting a new bump stick. Yay bikes!

Rofl

SAY WHAT? THE DIFFERENCE BETWEEN 20X110MM THRU-AXLES AND 20X110MM BOOST THRU-AXLES EXPLAINED

In the bike industry's never-ending quest to make nothing compatible with anything else, there are now two types of 20mm through axle systems: 20x110mm and 20x110mm Boost. Yes, really. But it's going to be OK. Let's go through this and help make sense of it together. Does this even apply to me...

stans.com

 

[Jm_]

Rofl

SAY WHAT? THE DIFFERENCE BETWEEN 20X110MM THRU-AXLES AND 20X110MM BOOST THRU-AXLES EXPLAINED

In the bike industry's never-ending quest to make nothing compatible with anything else, there are now two types of 20mm through axle systems: 20x110mm and 20x110mm Boost. Yes, really. But it's going to be OK. Let's go through this and help make sense of it together. Does this even apply to me...

stans.com

Technically, yep. But you lose the advantage of the wider flanges and stronger wheel

-Said no one ever.

And fuck you Stan.

 

[jackalope]

-Said no one ever.

And fuck you Stan.

This X a-fuckin-thousand.

 

[Jm_]

But we made that one part that never ever breaks marginally stronger.

 

[jackalope]

 

[Westy]

-Said no one ever.

And fuck you Stan.

I think Stan is now this guy

Mike B.

ridemonkey.bikemag.com

 

[William42]

I may not have voted for the man, but one silver lining I guess is that Trump is making America great again by bringing back bullying. I think Stan needs an atomic wedgie, and probably to have his lunch money stolen.

 

[bullcrew]

Lol I never quit telling people to shut the hell up...it's always been cool in my book..

And @William42 he doesn't carry lunch money it's all digital...sadly those days are gone...muscle em at lunch and hit the 7-11 for snacks with newly donated money...so sad..

 

[William42]

Lol I never quit telling people to shut the hell up...it's always been cool in my book..

And @William42 he doesn't carry lunch money it's all digital...sadly those days are gone...muscle em at lunch and hit the 7-11 for snacks with newly donated money...so sad..

To be honest, I don't really know who Stan is, or why we're blaming him for 110x20 boost.

 

[Jm_]

To be honest, I don't really know who Stan is, or why we're blaming him for 110x20 boost.

Well, hes the one who said you’ll miss put on all the wonderful benefits of 20mm “boost”.

Complicit.

 

[bullcrew]

To be honest, I don't really know who Stan is, or why we're blaming him for 110x20 boost.

Well fu(# Stan he's an asshole ..I don't know him either
I'll still tell him to shut the hell up...I don't want people to feel left out.

@Jm_ I like 20mm on dual crown, I don't think a 15mm makes me feel the same warm fuzzy feelings ..I'd be curious to see the load difference.....or added strength and deflection or twist.

 

[William42]

Well, hes the one who said you’ll miss put on all the wonderful benefits of 20mm “boost”.

Complicit.

Oh yah thats fair. I stand by what I said. Fuck that jackass.

 

[jstuhlman]

DAMMIT STAN

 

[Electric_City]

-Said no one ever.

And fuck you Stan.

Did Stan invent it, or was he just explaining it?

 

[Electric_City]

Oh, I almost forgot... Fuck you Stan

 

[bullcrew]

Get a torch, Stan the man's going down...