Anyone know the bearing codes for a 7 point kit?
Looked everywhere and cant find what they are.
w
Looked everywhere and cant find what they are.
w
7 point bearings
- Thread starter wysiwyg
- Start date
check enduro out here. http://www.enduroforkseals.com/id266.html
Yeah but its the codes i need to get them from my local bearing shop. need them like tomorrow.
email enduro fork seals and they will prolly tell you the codes...pierce cycles in the UK has them in stock I believe...are u anywhere near them???
at the other end of a phone, so close enough.
Chances are your bearing supplier won't have the extended inner race, if the 7 Point uses those. I tried to get from bearing suppliers and they'd never seen anything like it.
the earlier 7points had an aluminum spacer stacked in there instead of the extended inner race, IIRC.
What bearings do you need and what year 7POINT?
Earlier 7POINTs use:
2X 6902 2RS MAX (lower main pivot)
2X 6000 2RS MAX (upper rocker frame pivot)
4X 608 2RS MAX (chainstay and seatstay pivots)
Later 7POINTs and all 6POINTS use
4X 6902 2RS MAX-E (lower main pivot and chainstay pivot)
2X 6000 2RS MAX-E (upper rocker frame pivot)
2X 608 2RS MAX-E (seatstay pivots)
The E stands for Extended inner race, these were custom bearings that I sourced from Enduro. You can still buy them directly from Enduro as a kit I believe. Stock non extended bearings will work fine on the later frames but you will need a 3mm wide spacer to go between the bearing and frame/link if you don't' have the extended race bearing available.
It makes me happy to see so many IH's still alive and getting abused. That 7POINT is one of my favorite bikes of all time.
hope this helps,
Dave