[shock]

And for more clarity, without the floater.



Advantages of our conversion?

1) easier to use than the Fun bolts

2) Can be used with a Saint axle/derailleur

3) stronger and lighter, but elimates axle breakage

4) can be used with 10 or 12 mm thru axle

5) can be used with 150 spacing with disc spacer.

To do this mod, we modify the stock qr axle, and make a new end cap. $75. If you send your hub, no charge for installation.

For the 12 x 150 kit, $150, including th edisc spacer, which bolts to the hub, and the disc bolts to it (to avoid using really long disc bolts)

 

[Kntr]

Any pics of the disc spacer for the 150mm?

 

[shock]

Unfortunately, I can't seem to find my pics of the 12 x 150 conversion at all! But i'm like that sometime.

Julian DH posted here that he had our 12 x 150 conversion, maybe he could be coerced into posting a pic or two....

For the disc spacer, nothing fancy. Imagine a ring, 15 mm wide. The OD is the OD of the stock disc bolt flange, the ID is the same as the CK hub, i.e. about the diameter of the lock ring. One set of holes, with counterbores, to bolt the ring to the hub with submerged bolts. Another set of threaded holes for the disc to bolt on to. We could have done it with one set of holes, but you'd have to use really long bolts to mount the brake disc.