[819]

So I put myself on the ground last week and bent the lever blade on a set of the new Saint Brakes (BL/BR M810).

I've taken a look at the tech documents online. I've take off both faceplates but I can't figure out if the pivot is held in by a screw or not. Does anyone know if it simply presses out or do I need to unscrew a set screw first.

Thanks

http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/BL/EV-BL-M810-2831A_v1_m56577569830646629.pdf

 

[jvnixon]

After you take the top faceplates off you have to remove the pivot. There is a screw that holds the lever pivot on there.

To reach it, you should first take the lever body off the handlebar. Then underneath where the hose exits the lever body is a hole where you can insert an allen wrench in there (can't remember what size offhand).

After you loosen that bolt, the lever pivot can be removed.

 

[819]

Thanks.