[FRosT]

How do I get the bolt attaching the drive-side crank to the spider loose? I've got an Evil SRS guide and there's no way that I can see to get at that bolt. The inner plate is blocking it no matter where I move the cranks. Any suggestions? I didn't install them so that's why I'm askin.

Jeff

 

[bomberz1qr20]

Originally posted by FRosT
How do I get the bolt attaching the drive-side crank to the spider loose? I've got an Evil SRS guide and there's no way that I can see to get at that bolt. The inner plate is blocking it no matter where I move the cranks. Any suggestions? I didn't install them so that's why I'm askin.

Jeff

Depending on what you have bolted to the spider, be it rings or guards, etc, you may have to pull the whole drive side off and pull the inner rings/guides off the spider.

Double check if the bolt is SAE or metric, so as not to strip it or the wrench.

 

[FRosT]

I'll try taking the crank off with the spider attached. Thanks for the help.

Jeff