Took about 10 psi out of the fork before my race run and the fork completely bottomed out. I see a little oil seems to have leaked from under the blue compression knob and I can only conclude that this is not a good thing. I figure I blew one of the O-rings out. It still functions normally but I figure this is something that I will want to look into further. Ive been looking at two rebuild kids (push and rockshox) and figure this is where to start. Can anyone give me a little guide to figure out exactly what I need. Its a very small amount of oil and the seals to my lowers look are functioning well.
What would I see if I blew the damper catridge vs. just blew an o-ring?
What would I see if I blew the damper catridge vs. just blew an o-ring?