[StunZeeD]

Cassette spacing for a 150mm Rear & 83BB

I am attempting my first complete build. A 2009 Yeti 303, the rear wheels is a Hope Pro2 150mm TA hub and the front is Shimano Saint Single Ring with the 83mm BB and a E13 LG1 (running one spacer behind the Bottom Bracket as Shimano Suggested) how many spacers should I be running behind the spacer

 

[jonKranked]

Cassette spacing for a 150mm Rear & 83BB

I am attempting my first complete build. A 2009 Yeti 303, the rear wheels is a Hope Pro2 150mm TA hub and the front is Shimano Saint Single Ring with the 83mm BB and a E13 LG1 (running one spacer behind the Bottom Bracket as Shimano Suggested) how many spacers should I be running behind the spacer

uhhhhh what?

I believe according to the crank install manual its 2 driveside, 1 non-driveside.

 

[StunZeeD]

sorry you are right 2 on drive side 1 on non is how i got it

 

[jonKranked]

so where do you need the spacers?

 

[StunZeeD]

behind the cassette I assume, I have never installed a cassette on a 150 hub

its a a Shimano HG80 Cassette

 

[jonKranked]

behind the cassette I assume, I have never installed a cassette on a 150 hub

its a a Shimano HG80 Cassette

Shouldn't need to put a spacer behind the cassette. If its a normal sized 8/9 speed hub then you shouldn't need spacers. On a 150mm spaced hub, the freehub is the same size. It's the distance between the hub flanges that changes.

 

[ridiculous]

had pretty much the same setup on an 07 303. You shouldnt need a spacer at the cassette. I do believe I had 2 drive side spacers at the cranks.