Quantcast

Crank-guide setup for V10

Discussion in 'Downhill & Freeride' started by bigdrop05, Sep 2, 2005.

  1. bigdrop05

    bigdrop05 Monkey

    Rep/Likes:
    0 / 0
    Joined:
    Mar 26, 2005
    Messages:
    427
    Just aquired$ a sweet 1'st generation V10 :D

    I have some New Saint Hollowtech 2's.
    Would they be a good choice, or go chromoly ?
    What guide works best ?E-13 or MRP,if so which style.
     
    #1 -   Sep 2, 2005

    Please register to disable this ad.

  2. vitox

    vitox Turbo Monkey

    Rep/Likes:
    0 / 1
    Joined:
    Sep 23, 2001
    Messages:
    2,939
    Location:
    Santiago du Chili
    e13 works perfect ive installed plenty of them to that frame, you have to use a 123 or 128mm isis bb and flip the iscg adapter so it cups outward and use about 4 washers per bolt.
     
    #2 -   Sep 2, 2005
  3. RD

    RD Monkey

    Rep/Likes:
    5 / 0
    Joined:
    Jul 31, 2003
    Messages:
    689
    Location:
    Boston, MA
    #3 -   Sep 2, 2005
  4. fortfun19

    fortfun19 Chimp

    Rep/Likes:
    0 / 0
    Joined:
    Oct 28, 2004
    Messages:
    77
    Location:
    Fort Collins, CO
    I run an E-13 and it's bad ass, never lost a chain. GET ONe!!
     
    #4 -   Sep 3, 2005
  5. Steen Good Legs

    Rep/Likes:
    3 / 0
    Joined:
    Sep 7, 2001
    Messages:
    99
    Location:
    Copenhagen- Denmark!
    I ride an 1´ste gen V10 myself :p

    An SRS E 13 wont work with Saint cranks, they- the cranks, are too short due to the outboard bearings, so they only "grip" 1/3 of the spindle, been there myself, and it wont work...

    Go ISIS 123- or 128 mm, and everything is sweet... :thumb:
     
    #5 -   Sep 3, 2005