[freakyletta]

I just got my demo nine built up and I'm stoked. I'm about 190, and I have about 80psi in the SPV chamber of the 6-way and the high speed compression about half way in, low speed all the way out, sag set to about 30%, and it feels pretty good with the 888r up front. I have nothing to compare it to though, so what are you guys running your shocks like. mine is set up probably the least efficient for climbing, but super plush going down. any tuning suggestions to get the most out of my bike would be great. I ride everything from high speed, to low speed tech, to drops and jumps, so I need it to be a neutral setting. thanks a lot guys.
peace,
john

 

[jedi]

that's pretty much what i've set mine up to except i run 130psi in the platform ,helps for riding shore constructions :O)

 

[Tom DH]

I find it works better with the high and low speed compression screwed all the way out. I also run it in the top hole.
The only bad thing about the demo 9 is putting the shox back in, how annoying is it getting that shox back it with those washers that have to sink into the frame. neaky: