For Sale E13 TRS+ Wheelset

Cross Country & Trail
Mountain (AZ, CO, ID, MT, NV, NM, UT, WY)


Oct 29, 2003
Walla Walla, WA>Boise, ID
Almost new and barely used!

Low miles/hours E*Thirteen TRS+ wheels - the standard in Trail/Enduro. Big flanges and an EXA+ aluminium shell increase wheel stiffness and strength while maintaining a low weight. The rear was factory service and essentially new. The wheelset itself is practically new as I took them off my new bike after a few rides and put on a carbon wheelset. Freewheel driver has zero wear on it.

Critical rotational weight is moved closer to the centre of the wheel resulting in an extremely strong, light and durable wheel with amazing acceleration and cornering characteristics. XD driver compatible.

EXAlite Aluminium
A basic shake and bake blend of 8 special herbs and spices (Silicon, Iron, Copper, Manganese, Magnesium, Chromium, Zinc, and Aluminium.) It comes in three different performance blends: EXAr, EXA+ and basic EXA.

660 Freehub
Our indestructible freehub rachet mechanism. All of our hubs have a blazing fast 6 degrees and 60 points of engagement to get you the best acceleration on climbs and out of tight corners.

Angular Contact Bearings
Angular contact bearings are supported by a thick section of bearing race on either side, as well as top and bottom. These bearings are designed to support 'combined loads' in both the axial (turning) and radial (accelerating) directions.

Triple Start Thread
The reverse thread nut on our hubs has 3 threads for more strength, and only requires a hand tightened twist for adjustment.

Tubeless System
E*thirteen Tubeless compatible rim profiles have tubeless bead features designed in, so your tubeless tyres set up easily and stay in place without those embarrassing 'burps' during high speed corners.

Lightweight Extrusion
Our new LEX and LEXe processes yield rims thaty are strong enough to cross any terrain you can throw at it.

Swappable endcaps
Fully sealed bearings
EXA+ flanges and centre section
Fully rebuildable
Weight: 198g (front), 390g (rear)
EXA+ aluminium with LEX extrusion technology.
Tubeless ready
Width: (ID/OD): 23.4/28mm
23.4mm rim bed to better accommodate wider tyres
Spokes: Hive quad-butted custom x 28
Nipples: Black aluminium
Axle Configuration: 15mm thru, 142X12
Intended Use: Enduro racing/training
Weight: 753g (front 650b), 943g (rear 650b)
$350 or best offer. If post is still showing, then the wheels are still available.

Review: https://bikedibley.wordpress.com/2013/12/17/review-ethirteen-trs-am-wheelset/