[teeter]

So i have a rigid fork right now, i wanna run pegs on the right side, what are my fork options with 80-100mm of travel that i can run a peg aside from the d-street. can i just use the 20mm TA sleeve and run a 14mm bolt on axle through it on the marzocchis...? let me know thanks

 

[Squirreldh]

That sounds like an OK Idea. You're talking about the marzocchi qr20 axle right? get rid of the qr and run a 14mm axle through it. you may want to check the inner diameter of that axle and see if it can accept something that size. Maybe try a piece of aluminum or steel tubing with an outside diameter of 20mm and possibly 3mm wall thickness, that would bring you down to 14mm inner diameter for the axle to go through. good luck and post your results and maybe some pics.