After the usual check up i noticed an amound of play between the pivot bold and the bushings.
I thought the 1/2"DP bush was worn out, after replacing these there still was an amount of play.
Looking further i saw the play is between the Sunday's main pivot bold(at the right on the pic.) and the iron bush(in the middle on the pic.)
If you look at the pic. you 'll get what i mean.
I noticed that the middle tube is not rotating in the 1/2"DP bush. and that the main pivot bold is rotating inside the tube, so it all got worn out.
My question is: Am i the only one with these problems or is it an known problem, and has anybody got an id before i start making a new main pivot bold.
Cheers,
Roy
Hope you guys get what i mean
http://www.pinkbike.com/photo/1538642/
I thought the 1/2"DP bush was worn out, after replacing these there still was an amount of play.
Looking further i saw the play is between the Sunday's main pivot bold(at the right on the pic.) and the iron bush(in the middle on the pic.)
If you look at the pic. you 'll get what i mean.
I noticed that the middle tube is not rotating in the 1/2"DP bush. and that the main pivot bold is rotating inside the tube, so it all got worn out.
My question is: Am i the only one with these problems or is it an known problem, and has anybody got an id before i start making a new main pivot bold.
Cheers,
Roy
Hope you guys get what i mean
http://www.pinkbike.com/photo/1538642/