Quantcast

fox40 and hope mono m4

Discussion in 'Downhill & Freeride' started by atb, Dec 2, 2005.

  1. atb

    atb Monkey

    Rep/Likes:
    4 / 0
    Joined:
    Jun 18, 2004
    Messages:
    201
    Location:
    the north shore
    what size rotor and caliper do i need to use a hope mono m4 on my fox40. i'v tryed a #8 caliper and a #3 caliper with a 200mm and a 205mm rotor, but thay didnt match up.
     
    #1 -   Dec 2, 2005

    Please register to disable this ad.

  2. bballe336

    bballe336 Turbo Monkey

    Rep/Likes:
    0 / 0
    Joined:
    Mar 3, 2005
    Messages:
    1,757
    Location:
    MA
    You need whatever the 6 inch adapter is if you are running 8 inch disks (which is the only option on that fork).
     
    #2 -   Dec 2, 2005
  3. joelsman

    joelsman Turbo Monkey

    Rep/Likes:
    4 / 0
    Joined:
    Feb 1, 2002
    Messages:
    1,369
    Location:
    B'ham
    you need 220 ROTOR or 225mm or whatever hope offers about that size.
     
    #3 -   Dec 2, 2005
  4. Salami

    Salami Turbo Monkey

    Rep/Likes:
    3 / 0
    Joined:
    Jul 17, 2003
    Messages:
    1,622
    Location:
    Waxhaw, NC
    In order to run a 200mm rotor you would need a #5 caliper which I don't believe Hope makes in the Mono 4. A #3 caliper would require a 220mm rotor which I think they make but I am not sure. A #8 would need a 240mm rotor to match up correctly.

    I know they do make a 225mm rotor for the Mono 6Ti.
     
    #4 -   Dec 3, 2005