[NOM4D]

hey all:
so this is the deal. I have a cheap joytech disk hub... it is unsealed.
the thing had developed a little too much slop, so i decided to take the little bastard apart and clean and repack the bearings...
so, when i am tightening up the axle on the hub with the cone wrenches, i cant find a happy medium. if the nuts are even a pinky push too tight, the hub is all bindy.. i cant really loosen them, because they will then be free to spin as they please.
anyone have ideas?
do i have to tighten the inner nut thing to the outer nut thing?

 

[johnbryanpeters]

See Sheldon Brown on cone adjustment.

J

 

[NOM4D]

thanks