Quantcast

Freehub body removal help

Discussion in 'The Shop' started by drimena, May 12, 2013.

  1. drimena

    drimena Chimp

    Rep/Likes:
    2 / 0
    Joined:
    May 12, 2013
    Messages:
    5
    Hi guys, I've been searching through internet trying to solve my problem but with no luck.I hope someone could help me.I noticed light freewheel dragging the other day so I decided to clean and relube my Syncros rear hub.I removed the cassette with no problem but I don't know how to remove axle and freehub body.there is a lot of info on the net about removing different types of hubs but I haven't found the way to remove mine.I'm posting 2 photos of the disassembled hub from either side...



    I'm stuck at this situation.in the second picture you can see that I tried to pull the axle out but this is as far as it would go.can someone tell me what should I do to completely remove axle and the freehub body.
    Thanks, appreciate your help...
     

    Please register to disable this ad.

  2. Mike87

    Mike87 Chimp

    Rep/Likes:
    0 / 0
    Joined:
    Aug 8, 2011
    Messages:
    16
    Location:
    San Jose, CA
  3. drimena

    drimena Chimp

    Rep/Likes:
    2 / 0
    Joined:
    May 12, 2013
    Messages:
    5
    Thank you...