[mogulskr]

Started putting together a new bike last night. I have a FSA Orbit XL 2 headset and a Duke XC fork. When I went to put the conix thing in the steerer tube it did not seat all the way. So I tapped a little with no luck. Finally decided to pick up the instructions and noticed a note saying if you have an alloy steerer tube contact FSA for a different conix thing. So I go to www.fullspeedahead.com and the main page loads, but all the other pages are not found. Anyone have any idea how to get in touch with them?

 

[sub6]

send Freak a PM

 

[mplutodh1]

Here it is, they are great about helping out.

Full Speed Ahead Headquarters
12810 NE 178th St. Suite 102
Woodinville, WA 98072

Phone – 425 488 8653
Toll Free – 877 RIDE FSA
Fax – 425 489 1082
e-mail – info@fullspeedahead.com

 

[D_D]

With a bit of creative fileing you can get it to fit in an alloy steerer.

I would just fit a standard star nut as the fsa things are not very good.

 

[mogulskr]

Thanks for the info......I found another note on the 02 headset that said it was alright to have the conix rest on the lip below the o-ring as long as all the teeth are inside.