Well I just build my new DH bike, and I sat on it and.... when the rear shock compressed(Roco WC 500 lb spring, 9.5x3.0), it sounds like the spring is under alot of stress. Making a very strange sqeaking noise. Any ideas?
Also, got my LG1 today. It's sweet btw, but i had some trouble with spacing. The chain ring is to close to the frame side. So it will rub the inside. I can't put any spacers on the chain ring because it is up against the spider with no room to move. I put two gold spacers on the top guide(inbetween the backplate and the top guide peice. Is that right? Or can I put spacers between the frame and the back plate?
Also, got my LG1 today. It's sweet btw, but i had some trouble with spacing. The chain ring is to close to the frame side. So it will rub the inside. I can't put any spacers on the chain ring because it is up against the spider with no room to move. I put two gold spacers on the top guide(inbetween the backplate and the top guide peice. Is that right? Or can I put spacers between the frame and the back plate?