Hayes Hyd brakes?????????
- Thread starter stosh
- Start date
bring them to your LBS
The easiest way to line up the pads is:
1. take the wheel off
2. take the pads out
3. with a 10mm wrench, push the pistons back as far as they go, being careful not to brake off the post the shoes connect to.
4. reinstall wheel
5. loosen caliper bolts (not the brake adapter; loosen the bolts that connect the caliper to the adapter)
6. squeeze brake lever and jiggle the caliper to allow it to set itself on center
7. while still holding the lever, tighten the caliper bolts
You should be good to go, if not after step 5, slide a business card between the outside pad and the rotor and proceed to 6.
Oh yeah, after I typed all that, I realized you should just do a SEARCH because i've typed it before
The easiest way to line up the pads is:
1. take the wheel off
2. take the pads out
3. with a 10mm wrench, push the pistons back as far as they go, being careful not to brake off the post the shoes connect to.
4. reinstall wheel
5. loosen caliper bolts (not the brake adapter; loosen the bolts that connect the caliper to the adapter)
6. squeeze brake lever and jiggle the caliper to allow it to set itself on center
7. while still holding the lever, tighten the caliper bolts
You should be good to go, if not after step 5, slide a business card between the outside pad and the rotor and proceed to 6.
Oh yeah, after I typed all that, I realized you should just do a SEARCH because i've typed it before
Yep, heres how.
1) Remove wheels then rotors
2) Remove calipers and levers
3) Call me and purchase some Hope brakes
4) Install new Hope brakes
5) Enjoy the best brakes on the market
It's that easy
1) Remove wheels then rotors
2) Remove calipers and levers
3) Call me and purchase some Hope brakes
4) Install new Hope brakes
5) Enjoy the best brakes on the market
It's that easy
It should be a macro... automatically coming up when the words hayes hydro and adjust are used....
