[dilzy]

Just about to order some 4 port Saints from CRC and they don't have the 6 bolt alloy carrier xt disks in stock, has anyone used the Hope v2 disks with them?

My real concern is whether the hope disks are thicker than the Shimano ones?

 

[Sandwich]

you will NOT be able to fit the hope moto v2 vented rotor in a saint caliper...but you might able to fit the non-vented version.

I run alligator rotors (from pricepoint, 19$ each) without problems in my 810s......

 

[dilzy]

Yeah I mean the floating ones, not the vented (too costly anyway).

 

[Bikael Molton]

I had problems with the first gen floating Hope rotors and the old XT 4pots... the rivets that hold the rotors contacted the calipers.

 

[marshalolson]

i would suggest the hope m4 rotor that is fractionally thinner. have used them on avid and hayes brakes with good results, and the 6" on shimano xts with good results as well.

 

[Huck Banzai]

I like to use avid rotors; have a set of Hayes V8 I use with my saints. Most rotors are interchangeable excepting the above and maybe magura (who like to use 190/210)

 

[dilzy]

I might just wait, as it seems I'd have to get v2's to stop the rubbing, but the saw rotors for thickness.