i have 4/4,s 1 2/10 and lots of small stuff.and can spend about 20$ (i know thats not much $) and i want it to be about 2ft tall.and not real steep. anyone got any ideas?
face
face
how to build a decent ramp for cheap.
- Thread starter face planter
- Start date
goto a construction site. Take all of their wood in the dumpsters. It's free.
are you aloud to do that?
or do you just do that all the time
or do you just do that all the time
well let's see, you have:DVNT said:
4/4=1
1 2/10 (maybe a space was added by mistake should be 12/10)= 1.2
$20=$20
and you want to build a not too steep ramp about 2 high. I say stack the 1 on top of the 1.2 so you have about 2.2, crease the $20 lengthwise and unfold it to about a 120 deg angle, prop it up on the 2.2 and you'll have a ramp.
yea you can do it. I've done it all my life. Just don't take any of their new unused wood and they usually don't mind. Then all thats left to buy is screws and bolts possibly.
In Kentucky if it's in a dumpster or a garbage can, it's free for anyone to take.
Not like i've built anything myself...but if I did (wink, wink) that's what I would do.
Not like i've built anything myself...but if I did (wink, wink) that's what I would do.
all wood straight from the trash......
32" tall
32" wide
5.5' long
32" tall
32" wide
5.5' long
nice work mate... good jump as wellWestCoastHucker said:
i can NOT get wood from a construction site cause im only 14 and my parents will not let me.and what i ment to ask is what a googd plan would be like how to build it and how to get the curve.
i used an 8' piece of string and made a compass out of it. the tranny is an 8' radius, ending at 32" from the floor.......face planter said: