[Zark]

This is a place to put up hub dimensions for spoke calculations (since it seems all the online calcs never have the specs for your hub. Please add specs of your hubs in the same format and we'll have a fine resource

All measurements in mm

Hadley 20mm front: Flange dia=60, Center to right=22.6, center to left=31.4

Hadley QR front: Flange dia=56, center to right=24, center to left=33

Hadley 135 rear: Flange dia=60, center to right=20.3, center to left=33.7

Hadley 150 rear: Flange dia=60, center to right=27.8, center to left=32.2

 

[Dirtbike]

The DTSwiss calc. gives you all these specs.. its as easy as selecting the hub and BOOM! hub spec info!

 

[punkassean]

Noah, did you get the specs from Hadley? I'm building up a Hadley rear wheel for my enduro and I don't completely trust the specs on DTSwiss (based on experience).

I scored a yellow Deemax/823 rim that can be built to any hub so my wheels will still match, stoked.

 

[Zark]

Noah, did you get the specs from Hadley? I'm building up a Hadley rear wheel for my enduro and I don't completely trust the specs on DTSwiss (based on experience).

I scored a yellow Deemax/823 rim that can be built to any hub so my wheels will still match, stoked.

The specs for the 150 I got with the Hadley hub I built up for a friend.
The others were from MikeB. I don't trust the specs on Dt Swiss's website and they didn't have the 150 hub in there when I posted this.

 

[Mike B.]

The specs I posted and Zark was nice enough to bring to this thread came straight from Hadley. I've not built a 150 Hadley so I can't confirm those but good call on not trusting the DT spoke calc, I too have been down that road.

 

[punkassean]

Just the other day I trusted the DT calc on a Nexus hub built to a 20" rim and what do you know, the custom cut spokes I ordered from Paceline were WRONG. Doh!

 

[in the trees]

Let's add the Hadley contact number to this thread for good measure.

909-946-6780

The question gets asked so often.

toby

 

[Mike B.]

The best spoke calc I've used is the Damon Rinard excel spreadsheet version. I've heard the one in Bike-a-log is good too but I don't use it.

 

[punkassean]

Anyone know the spoke hole diameter on a Hadley?

 

[DH biker]

The best spoke calc I've used is the Damon Rinard excel spreadsheet version. I've heard the one in Bike-a-log is good too but I don't use it.

Which is now on here:
http://www.sheldonbrown.com/rinard/spocalc.htm

Anyone know the specs of Arrow 24" rims?

 

[w00dy]

Which is now on here:
http://www.sheldonbrown.com/rinard/spocalc.htm

Anyone know the specs of Arrow 24" rims?

http://www.arrowracing.com/home.html

 

[binary visions]

http://www.arrowracing.com/home.html

I suspect that, 5 years later, he has his answer or no longer cares