[newrider3]

New S&M Dirtbike

We've been getting requests for basically the same frame for awhile now and this is it. The Dirt Bike has a 74.5 head tube, taller stand over and a 14" rear end. Built with SuperTherm tubing, this frame is light and strong. It's not available brakeless, it uses a regular seat-clamp, there aren't any holes drilled in it for lightness. This thing looks like a regular BMX frame that wasn't designed specifically for tail-whips, nose wheelies and hang fives! In other words it's a ****ing Dirt Bike. Get off the World Wide Interweb and go haul ass on a Dirt Bike.

Available in classic powder-coated S&M colors Black, Yellow and Red with retro Dirt bike graphics.

Like all S&M frames the Dirt Bike is proudly Made in the USA.

Top Tube Lengths: 20.5", 20.75", 21.0", 21.25"
BB Height: 11.8"
Chainstay: 14"
Head Angle: 74.5 degrees
Seat Angle: 71.0 degrees
Weight: 5 lbs give or take for TT size (don't be a weight weenie)
Dropout Slot: 14mm
990 Mounts: On seat-stays
Avail brakeless: No way
Gyro Tabs: Removable
Head Tube Type: Integrated Hiddenset
BB Type: Mid Press Fit
Integrated Seat Clamp: Not a chance

Butted/Air-hardening SuperTherm tube set
SuperTherm is a proprietary superthermophillic (heat-loving) alloy, developed in partnership with the U.S. Steel Alliance. The composition of Chromium, Molybdenum, and Vanadium with an unprecedented 217 ksi ultimate tensile strength makes this alloy actually gain strength through a metallurgical transformation in the heat-affected zone as a result of welding or brazing. SuperTherm is highly temper-resistant, resulting in an 11% increase in fatigue life and a 20% increase in impact strength over Heat-treated 4130. The increased mechanical properties of SuperTherm allow for incredibly strong, yet lightweight frame designs with that legendary feel of steel ride quality.

74.5 head angle (for stability at speed)
14" rear end (this isn't a unicycle)
Available only with 990 mounts (so you can stop)
Made from SuperTherm Butted and Air-hardening tube set
Taller Stand Over Height (doesn't look like a scooter)
Made in USA

 

[basikbiker]

any pictures? the old ones were dope

 

[newrider3]

There is a picture there.

 

[Cru Jones]

Mmmmm, yes. That's the radness.

LOL at "5 lbs give or take for TT size (don't be a weight weenie)" and "Avail brakeless: No way"

 

[Mr Tiles]

so it's a stricker minus the anchor? if that's the case, pm me and I'll make you a deal on one

 

[t1maglio]

I was just wondering if they were going to remake the Holmes. I guess they are doing different TTs but ...

 

[Cru Jones]

so it's a stricker minus the anchor? if that's the case, pm me and I'll make you a deal on one

And minus the the integrated seat clamp. Geo looks exactly the same, though.

 

[Mr Tiles]

And minus the the integrated seat clamp.

yep, I missed that...

 

[freeridefool]

Call girl is still the best s&m ever. Nothing else compares.

 

[brycexlighthall]

I have a '95ish Holmes and a '93 Challenger, but niether are fully operational. I am stoked about eventually getting a "weight wheenie" BMX. The comments on the cut-outs seem to be a direct dis on EASTERN, the irony, is that seems to be the only thing that they haven't modernized about the Dirt Bike (generalization: feel free to flame away).

 

[Blown04GT]

I will have one of those in my "collection", except it will have wheels and cranks, as opposed to the rest of my current inventory

 

[standard125r]

i'll take a "21.25tt in yellow please!!

just wish they'd named the longer frames "holmes"

thats a sweet chrome ng there mr blowngt,

heres one i just finished,

challenger too,

 

[Blown04GT]

You seriously have the most awesome S&M collection I have EVER seen!!!!!

Could you email me some high res pics of those to shayes21@nc.rr.com ? The more the merrier