Quantcast

Integrated stem ...pls advice & comment!

frznnomad

Turbo Monkey
Jun 20, 2005
2,229
0
a-town biatches
dude he needs help setting it up not what you think about it. although that e13 stem is awsome.

so back to the topic at hand. the e-13 is made just for boxxer top crowns so if your running anything else the stem wont work with it bro.
 

dhkid

Turbo Monkey
Mar 10, 2005
3,359
0
Malaysia
did you just drill out a stock top crown? coz those two bottom holes are awfully close to the edge. otherwise just cut down your steerer tube man.
 

frznnomad

Turbo Monkey
Jun 20, 2005
2,229
0
a-town biatches
would cutting the steer tube acctually work. cause you would have to cut it flush with the top crown and i dont know if that would acctually hold like that,or would it??
 

dhkid

Turbo Monkey
Mar 10, 2005
3,359
0
Malaysia
think about it, you need steerer to be always a bit shorter then what ever the top cap is going to have contact with (be it the top crown, stem or spacers) otherwise the head set cant be preloaded.
 

dh_newbie

Monkey
Jun 7, 2006
191
0
Hong Kong
did you just drill out a stock top crown? coz those two bottom holes are awfully close to the edge. otherwise just cut down your steerer tube man.
This is a NEW CNC crown for zoki and boxxer type stem use. We make it due to we would like more integrated stem opinion for the 888.

I will keep posting more picture of this crown. The crown is make by 7 series aluminum and andoized.

I will cut down the steer tube in order to aviod the height is over the stem.
 

frznnomad

Turbo Monkey
Jun 20, 2005
2,229
0
a-town biatches
thats awsome man. are the crowns for sale, or are they still in trial stages. cause if there for sale there is a possibility i might be interested.
 

dh_newbie

Monkey
Jun 7, 2006
191
0
Hong Kong
thats awsome man. are the crowns for sale, or are they still in trial stages. cause if there for sale there is a possibility i might be interested.
Thanks frznnomad, these are still testing stage. We will be launch out when the time is ready.

Thanks for your comment!