[tuumbaq]

A little while ago , someone mentioned to me he was using liquid latex from an hardware store I think...Didnt pay to much attention at the time but I remember he said it was the same thing but WAY cheaper.I need to get some more Stans Sealant now and wouldnt mind trying this stuff.

Any monkeys out there using this or was that guy high?

 

[gonefirefightin]

oh......I saw "latex" and got all excited.........my bad

 

[tuumbaq]

oh......I saw "latex" and got all excited.........my bad

Wow, how old are you ,14 ?

Doesnt take you much to get excited young man.

 

[gonefirefightin]

Wow, how old are you ,14 ?

Doesnt take you much to get excited young man.

if you only knew my real age, ha ha

 

[xy9ine]

i'm using craft store liquid latex (used for making moulds), and the stuff seems to be working fine so far - at a fraction of the price of stans. check out the ghetto tubeless article from nsmb:

http://www.nsmb.com/gear/tubeless_12_04.php

 

[samdemo]

i think one of the big differances between the 2 is that stans adds small particles to their goo so it will seal up larger air leaks. I'm sure there are other differances, but this might be the one that one would notice more.

 

[rollertoaster]

A little sawdust works well to plug holes when a leak occurs.

 

[Tmeyer]

Or a bit of slime..

 

[S.K.C.]

I haven't seen him on here in a while but Kidwoo has a special recipe for mixing Stan's and Liquid Latex. Supposedly it works really well - AND makes an excellent topping for caramelized plantains.

 

[Racebike]

But the latex sealant, then grind down an inner tube so you get really small rubber chunks in the sealant. Done and dusted!

 

[NJHCx4xLIFE]

Glitter works well to plug holes as well and replace the chunks in Stans. Go to the craft store, grab a container of mold latex and mix it 1:1 with water. Then enjoy not needing to buy more sealant for a long time.

 

[Sonic Reducer]

how much is everyone putting in the tires volume wise?

 

[tuumbaq]

cool, got some great replies, thanks guys! I'll try to find some "mold builder"

 

[NJHCx4xLIFE]

2 scoops or 1 cup... same thing in my case since I carry a handy 1/2 cup measuring cup in my tool box.

 

[samdemo]

cool, got some great replies, thanks guys! I'll try to find some "mold builder"

don't know if you have one of these in Squamish, but in the lower mainland they are everywhere(or so it seems).

http://www.michaels.com/art/online/home

 

[Sghost]

Never tried looking at the hardware store, I always just went to the Adult/Porn shop for big batches.

 

[drkenan]

Never tried looking at the hardware store, I always just went to the Adult/Porn shop for big batches.

That was bad.

 

[gonefirefightin]

That was bad.

that was awesome!