I have a Roco R with the piggy back chamber (EDIT: it is a 2007 i think...). It is making a clunk at the very beginning of the compression stroke. Searching the intarwebs has revealed that this can be one of two problems: 1) too little pressure in the chamber and 2) the shock needs a bleed.
I checked the pressure today and it was fine. I researched bleeding the the thing and every picture and description that I have found talks about a bleed screw that should be on the manifold/arm/connector between the main body and the piggy back. My shock does not have this.
Be that as it may, could someone please explain to me how to bleed this thing?
I feel like a complete dunce for needing to ask this, but I can't really think of any way to bleed this thing properly short of submerging the entire shock in a bucket of shock oil...
I checked the pressure today and it was fine. I researched bleeding the the thing and every picture and description that I have found talks about a bleed screw that should be on the manifold/arm/connector between the main body and the piggy back. My shock does not have this.
Be that as it may, could someone please explain to me how to bleed this thing?
I feel like a complete dunce for needing to ask this, but I can't really think of any way to bleed this thing properly short of submerging the entire shock in a bucket of shock oil...