[Miracleboi123]

i bought an ns frame, got a wheelset as well.
I want to convert my 9 speed hub QR hub to a SS hub.
I have researched and only found ss conversion kits that come w/ a 3/32 cog. something i dont want to use (limits what sprockets i can use in the front). And since bmx bikes use 1/8 spacing on their sprockets/cogs i want that. Does anyone make a conversion kit that uses 1/8 cogs?

I also want the lowest tooth i can go to. I found gussets but their all use 3/32 =/

 

[sealclubber]

just use a 1/8 chain on a 3/32 cog, no biggie. then you can still use a 1/8 sprocket

 

[Miracleboi123]

really?! no problems?! thast awesome! thasnk for the help!

 

[jfiveonetwo]

I do the same thing, i'm currently am using a 1/8 kmc chain on a 12 tooth with no problems. I did have problems with the shadow chain though, it was too deep and would rub on my cassette spacers.

 

[Miracleboi123]

but is that 12t cog a 3/32? and is your sprocket a 1/8?!

 

[Cru Jones]

just use a 1/8 chain on a 3/32 cog, no biggie. then you can still use a 1/8 sprocket

This.

 

[jfiveonetwo]

but is that 12t cog a 3/32? and is your sprocket a 1/8?!

Yep, it is

 

[Miracleboi123]

ill definitely try it out then thanks! =] you guys are the best place to go to for help!