[djbiker]

Been looking around a bit and came up with this frame and fork for my freeride build, Ns surge with a rock shox domain 302 fork. I currently have a norco havoc and im going to be taking parts off of it and using them for my freeride bikes. Any parts that wont fit on this frame i should know of? And also what other parts would you recommend for building a freeride bikes (keep in mind i do a lot of dirt jumping to so im looking to keep my bike under 36 pounds). I was also looking at the kenda nevegal tires and wondering if it would fit if i got 26 X 2.5 ones?

Sry for all the questions.

djbiker

 

[djbiker]

Here's some specs of what i currently have on the havoc (all stock though)
headsetFSA Impact 8D integrated

cranksetCR-24C chromoly BMX crank, 28T 3 mm thick sprocket
bottom bracket48 spline, 19 mm axle BMX BB for Euro BB
pedalsOddessey Twisted pedal, white plastic
chainKMC K-710 BMX white nano plated
cassetteSingle 14T conversion sprocket with spacers
front derailleurN/A
rear derailleurN/A
shiftersN/A
barAlloy 31.8 mm , 670 mm width 50 mm rise bar, black
stemAS-13 alloy stem 31.8 mm bar, 60 mm ext
gripsAlien Nation Mr. Hand rubber, orange
front brakeHayes MX-4 mechanical, 6” rotor
rear brakeHayes MX-4 mechanical, 6” rotor
brake leversTektro MT-2.0
front hubKT alloy disc hub, 32 h, orange
rear hubKT 135 x 10 nutted, 8 spd, 32 H, orange
rimsAlien Nation PBR 26”, 32 hole, black
spokesStainless White 2.0
tiresKenda K-Rad 26 x 2.30
saddlePivotal thin seat, custom Norco design cover, hollow bolt
seatpostPivotal forged alloy, 27.2

So im honestly not sure what i would need new, just dawned on me but i need a new seat also.

 

[djbiker]

Specs on the ns surge

chain stay: 415mm
top tube (physical) 575 mm / 595 mm
angles with 520 mm fork : head angle 67 deg, seat tube angle : 71 deg
27.2 mm seatpost
mtb hub spacing 135mm, standard headset, euro bb

Rock shox domain :

travel 115-160mm
Weight 2875g (6.34 lbs)
Damping Motion Control IS
Spring U-Turn
Adjustments External Rebound, External Travel
Crown Forged, Hollow Al 66 TV, Anodized Aluminum
Steerer 4130 Steel 1 1/8"
Aluminum 1 1/8", 1.5", Tapered 1 1/8 - 1.5"
Upper Tubes 32mm, 4130 Tapered Wall Steel, Chrome
Lowers Magnesium, Maxle Lite 20mm Axle, Post Disc Mount
Recommended Rear Shock Vivid 4.1
Maximum Rotor Size 210mm

rock shox pike ( also considering that )
Spring - Dual Air
Travel - 140m
Travel Adjust - All-Travel
Weight* - 2023g (4.5 lbs)
Spring Adust - Air pressure via dual Schrader Valves
Damping - Motion Control
Damping Adjust - External rebound, low speed compression to 'Lock' with external Floodgate
Lowers - Magnesium, Maxle 360 20mm, IS disc mount
Crown - Forged, hollow 6061 T-6 aluminium
Steerer Tube - Aluminium 1 1/8

Don't know if this helps or not,

djbiker

 

[djbiker]

anyone know?