[UCSBrian]

So i installed my on-ones with my blackspire ds-1 chainguide. I snugged the driveside cup down pretty good and everythign was dandy. After a few days i noticed that the guide had rotated down quite far. Initially i just tightened the set screws on the guide plate. There is no play in the cranks at all, and everythign seems solid still. Yet the fact that the guide can move is disturbing to me. Should I take the whole thing apart and retighten the cup? I am wary of loctiting this area so i would like to avoid that. Since tightening the set screws everything seems to be solid. I guess im basically asking should i break it all down and re tighten the drive side cup.


Thanks
Brian

 

[riderx]

Email On-One directly, they seem to be on top of things customer service wise.