if the 2nd part of a cap thing. not sure what the name is but the other part of the bottom bracket is not fully on straight because the frames threads are crossing over, is this like very very bad and the frame is trash or is it nothing to worry about. its a azonic ds-1 2004.
question
- Thread starter dantaylor122333
- Start date
I hope english is not your first language, 'cuz this is one of worst-written posts I have ever seen.dantaylor122333 said:
From what I can decipher you cross-threaded your bb shell. They can usually be salvaged as long as you didn't force the bb all the way in. Take it to a good bike shop and let them try to chase the threads.
Then let them try to re-install your bb for you. And don't be surprised or bitch too much if the shop tells you that you need a new one.
Sounds like he might be riding it this way. Sounds like it's the loose cup that's in wrong not the fixed cup. Hopefully it's a cheap bb with a plastic cup, so its threads die before the bikes. Chase the threads on the bike, grease, and those things should thread in easy, even if it takes many tries. Don't force anything, like last time.