Quantcast

Race Face evolve DH?

Discussion in 'Downhill & Freeride' started by caseyo, Feb 1, 2008.

  1. caseyo

    caseyo Monkey

    Rep/Likes:
    0 / 0
    Joined:
    Feb 14, 2007
    Messages:
    112
    Location:
    Reno
    Anyone running these cranks? I can't get them off my new bike. I'm not retarded, I've tried removing the 10mm "crank puller cap" then the 8mm bolt that holds the crank arm on, then re-threading the 10mm cap in to push on the spindle and pull the arm off. This doesn't work. I also tried tapping a socket on the visible end of the spindle from the drive side. This didn't do anything either. Am I missing something? I don't see any pinch bolts ala Shimano. HELP!
     
    #1 -   Feb 1, 2008

    Please register to disable this ad.

  2. jvnixon

    jvnixon Turbo Monkey

    Rep/Likes:
    3 / 0
    Joined:
    May 14, 2006
    Messages:
    2,327
    Location:
    SickLines.com
    leave the 10mm crank puller cap in there.

    unscrew the 8mm bolt.
     
    #2 -   Feb 1, 2008
  3. caseyo

    caseyo Monkey

    Rep/Likes:
    0 / 0
    Joined:
    Feb 14, 2007
    Messages:
    112
    Location:
    Reno
    Thanks! Now I know I am retarded.
     
    #3 -   Feb 1, 2008
  4. DirtyMike

    DirtyMike Turbo Fluffer

    Rep/Likes:
    59 / 711
    Joined:
    Aug 8, 2005
    Messages:
    14,160
    Location:
    My own world inside my head
    Dont feel too bad, I walked in at My OLD SHOP that I do not work for anymore, to find the Owner having teh same problem. His solution was to use a peice of all thread and beat them untill they came loose. One of teh reasons its My old shop
     
    #4 -   Feb 1, 2008