[profro]

I am trying to help a buddy service his razor Rock hub for his DH9. Does anyone know how to pull them a part?

Any help would be greatly appreciated.

 

[jvnixon]

Maybe give GO-Ride a call,

http://www.ridemonkey.com/forums/showpost.php?p=1201463&postcount=7

 

[RD3]

Behind where the cassette goes there is a black plastic seal, gently pry it up. Then there is a metal snap ring, pry it up with a screwdriver. Then if you tap the nondrive side with a mallet it should all come apart. They basically press together.

 

[profro]

We got the snap ring out and tapped on the non drive side. It didn't seem to budge, but I'll tap a little harder. Thanks.

 

[Rockland]

I have a service document at home I could e-mail. I seem to remember there being a large preload ring behind the cassette body. The preload ring had notches in it's outer diameter. 2 or 3 small screws sat in the notch and held it in place.

 

[Full Trucker]

In your kitchen or garage there should be a cylindrical object with a cover... gently slide said hub in one of these and you should be all set!






Just kidding man, hopefully these other people have helped. I got nuthin' but jackassery this mornin...