[Racerx7734]

Is it as easy as it was with the juicy 7's?

Maybe I should ask another way.........how do you change the levers on codes?

My lady got me some straightlines...

 

[jvnixon]

Remove the allen bolts that holds the lever to the body. Once those two bolts are apart, you should be able to pull the lever innards out.

Remove the reach adjuster that adjusts the reach position.

When you re-install the reach adjust screw, I've found it is easier to thread the reach adjustment screw from the backside (have a allen through the hole and turn the allen from the backside).

Make sure to re-seat the cam back onto the rod snugly. The rest should be pretty easy if you pay attention when you take the lever off.

 

[Racerx7734]

Remove the allen bolts that holds the lever to the body. Once those two bolts are apart, you should be able to pull the lever innards out.

Remove the reach adjuster that adjusts the reach position.

When you re-install the reach adjust screw, I've found it is easier to thread the reach adjustment screw from the backside (have a allen through the hole and turn the allen from the backside).

Make sure to re-seat the cam back onto the rod snugly. The rest should be pretty easy if you pay attention when you take the lever off.

You my friend are a god among men........thank you.