[FlipSide]

Does anybody knows what are the dimensions of the replacable pins (is that the right word?) for the shimano DX flat pedals. I know there are two lengths of screws. I'm interested in the long ones because right now, I have the smaller ones and I want to change them before it's too late.

I'd like to know the length and the thread dimension so that I can order some.

Thanks!

 

[Certified Drunk]

Good luck, I went to 3 bolt company's and no match :angryfire
So, I drilled and tapped them to a standard size. Total time 30 minutes and $6.00

 

[SpasticJack]

Here is the exploded view with the Shimano part number for the replacement pins. good luck

http://www.shimano-europe.com/cycling/phpimages/product/exp_view/PD_MX30_.E.pdf

 

[narlus]

Originally posted by SpasticJack
Here is the exploded view with the Shimano part number for the replacement pins. good luck

http://www.shimano-europe.com/cycling/phpimages/product/exp_view/PD_MX30_.E.pdf

thanks for that exploded view/parts # diagram, it's cool.

now i can re-order my reflector set!

 

[SpasticJack]

Don't forget the reflector adapters for your SPDs on the XC bike. Visibility is very important you know.

 

[FlipSide]

Thanks!

I found that the sized that fits is M3 X 8mm (0.5mm pitch thread).

It cost me 25$ CDN for a 200 set (!!!)