[FuriousG]

Does anybody know the correct amount? I put in 100cc and they rebound way too slow... Maybe 95?

Appreciate it,
George

 

[BikeGeek]

According to the manual, which you can download from the Marz site, the z1 Alloy takes 96 cc and the BAM takes 100 cc (page 8). On page 36, they give a different way to measure it: fill the Alloy to 40mm from the top of the stanchion, and the BAM to 55mm from the top of the stanchion. Remember to pump the cartridge while filling to get all the air out.

http://www.marzocchi.com/admin/download.asp?IDFolder=126&LN=UK&Sito=mtb&Campo=ManualeUnico&IDOggetto=2880

 

[ZachTheMech]

the other thing you wanna make sure you do is make sure that the forks are completely compressed when filling them, then cycle them and re compress them, then re measure. If you dont compress them you will over fill them.

 

[FuriousG]

Damn,

I knew I forgot to do something.
Thanks for your help guys. My dumb ass would have never figured it out....

-George