I got this fork a few weeks ago. If you have 60 psi or less in it it makes a weird noise when you push down and pull back up. The compression and rebound seem fine until it makes a weird top out sounding thing. So i put around 80 psi in, the compression is kinda slow and rebound is kinda in the middle. The rebound nob is set as fast as it can go. Later that day i put a zip tie on, just to see how far down It was going. I realized i was bottoming out off a 1 foot drop to flat. So i added more air in, around 130 psi and screwed the Spv damping in, which is to help it not bottom out. To my suprize it bottomed out again off a one foot drop... Which kinda scars me becuase i weigh 160. Well the fork didn't move when i pushed down on it so i set it back to 70. This seems to feel ok, but its using all the travel on mostly every thing, im ok with it but it just doesn't seem right? Any body else have this fork? I also messed with the spv damping some today, i have it about 2 or 3 rotations in, about a 1/4 of an inch.
